Self-cleaning process:
The filter will start the self-cleaning process when
the pressure differential across the screen
reaches a pre-set value or a predetermined
lapse of time.
Cleaning of the filter element is carried out by the
suction scanner, which rotates in a spiral
movement while removing the filtration cake from
the screen, and expels it out through the exhaust
valve. The rotation of the scanner is operated by a
2-way (fwd/rev) drive unit that is attached
To the scanner by a threaded shaft, providing the
linear movement.
The exhaust valve is activated for the duration of
the cleaning cycle by a 3-way solenoid. During the
self-cleaning process, which takes
approximately 35 seconds, filtered water
continues to flow downstream.
The filter will start the self-cleaning process when
the pressure differential across the screen
reaches a pre-set value or a predetermined
lapse of time.
Cleaning of the filter element is carried out by the
suction scanner, which rotates in a spiral
movement while removing the filtration cake from
the screen, and expels it out through the exhaust
valve. The rotation of the scanner is operated by a
2-way (fwd/rev) drive unit that is attached
To the scanner by a threaded shaft, providing the
linear movement.
The exhaust valve is activated for the duration of
the cleaning cycle by a 3-way solenoid. During the
self-cleaning process, which takes
approximately 35 seconds, filtered water
continues to flow downstream.
| Cooling Water Discharge Industrial Water Intake Water Pipeline Flushing Pre-Filtration RO Pre-Filtration UV Pre-Filtration WTP Process Water Re-Circulating Water Zebra Mussle Control Welder Water Cooling Towers Process Water |
| Case of the Week Amway - Mike Boyd - Cooling Tower Cooling Tower Energy Reduction |
| Serving Michigan-Ohio-Tennessee |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
